How to Mount a Coin into a Coin Bezel

By mounting a coin in a coin bezel you are able to turn your rare and collectable coins into coin jewelry. Follow the easy directions below to secure the coin in your coin bezel.

Step 1

You will need a jeweler's screwdriver with a small flat blade; we suggest one that has a blade measuring from 1.0 – 1.20 mm in width. Use the screwdriver to first take the small screw out of the fitting of the coin bezel.

Step 2

Once the screw has been removed, you will be able to slightly open up the bezel so your coin can be slipped into place.

Important; Be careful when spreading the coin bezel open that you only bend as far as needed to slip the coin into place to prevent bending or kinking the coin bezel out of shape.

Step 3

Once the coin is in place pressure the gap of the bezel tightly and put the coin mounting screw back into place. While putting the screw back into place make sure not to over tighten it which will cause the screw and its fitting to get stripped. The coin is now securely mounted in the bezel and from here can be used to display your coin.

If you wish to hang your coin bezel from a chain you will need to use a jump ring or jewelry bail. Both the standard jump ring and the standard bail will accommodate a 4mm rope chain. If you require a larger chain bail they are available from our eBay store.